The secret of saving money with a heat pump used by Europeans

Reading time: 8 minutes

European revolution in heating

In Scandinavia and Germany, more than 60% of new homes are equipped with heat pumps. In Switzerland, this figure reaches 80%. European homeowners have long since discovered the secret of how to reduce heating costs by several times while maintaining perfect comfort.

Impressive facts: In Europe, heat pump heating systems are considered the standard for energy efficiency. The average European family saves up to 70% of their HVAC system costs thanks to this technology.

Now this European secret is available in Ukraine. The Mycond BeeSmart All-in-One heat pump embodies the best European technologies and energy efficiency standards.

Why Europeans are switching to heat pumps en masse

Economic feasibility

The principle of operation is impressive: The heat pump consumes 1 kW of electricity and produces up to 5 kW of heat, taking the rest of the energy from the surrounding air for free.

European efficiency standards:

• Minimum energy efficiency class A+++
• Seasonal coefficient of performance (SCOP) of at least 4.0
• Mandatory Heat Pump Keymark certification
• Compliance with EU ecodesign directives

Environmental responsibility

Europeans choose heat pump-based heating systems because of:

• Zero direct CO2 emissions during operation
• Use of renewable energy sources
• Compatibility with solar power plants
• Compliance with EU climate goals by 2030

Technological comfort

HVAC systems of the European level provide:

• Precise temperature maintenance with an error of ±0.5°C
• Automatic adaptation to weather conditions
• Integration with smart home systems
• Remote control via mobile applications

BeeSmart All-in-One: European technology from Mycond

Heat Pump Keymark certification

TheMycond BeeSmart All-in-One has been awarded the prestigious European Heat Pump Keymark certification, the highest quality mark for heat pumps in Europe. This heat pump meets the most stringent standards:

EN 14825:2018 - Seasonal efficiency of heat pumps
EN 14511-4:2018 - General test requirements
EU Regulation 2016/2282 - Ecodesign requirements
EU Regulation No. 813/2013 - Energy efficiency labeling

Technical characteristics of the European level

A range of capacities for different facilities:

TheMitsubishi Electric compressor is the same one used in the best European heating systems:

• Inverter power control
• Operating frequency up to 90 Hz
• Efficient operation at -10°C (COP up to 3.27)
• Water enthalpy testing

Integrated all-in-one solution

Compactness in a European way: Heating with supply temperature up to +55°C
Cooling for summer comfort
Hot water - integrated 250 L stainless steel tank
Full factory wiring of all components

Built-in components:

• Plate heat exchanger
• Energy efficient circulation pump
• Electric flow-through heater 9 kW
• 3-way valve Heating / domestic hot water
• Safety group with 3 bar safety valve

Smart HVAC technologies of the European level

Weather-dependent Smart Logic control

Intelligent algorithms analyze the outside temperature and automatically adjust the operating parameters:

• Energy savings on warm days
• Preheating before cold weather
• Optimization of the heating curve
• Minimize cycling on/off

Zone control

European comfort standard - control of two circuits with mixers:

• High-temperature for radiators
• Low temperature for underfloor heating
• Independent setting of each zone
• Tv1 and Tv2 sensors for precise control

SmartGrid integration

Thetechnology of the future, widely implemented in Europe:

• Integration with solar power plants
• Use of the cheapest electricity tariffs
• Automatic control of consumption during peak hours
• Modbus protocol for integration with a smart home

Protection systems and reliability

Multi-level protection

European safety standards:

• Protection against freezing of the coolant
• R32 refrigerant pressure monitoring
• Overheating and overload protection
• Fault diagnostics with display of error codes
• Automatic restart after power failure

Intelligent defrosting

Optimized defrosting system - defrosting only when needed to save energy, unlike systems with fixed cycles.

Economy and optimization modes

Adaptive operating modes

Sleep mode: Automatically reduces temperature and noise for nighttime comfort and savings.

Vacation mode: Maintains minimum temperature to maximize energy savings.

Economy mode: Automatically switches to the most efficient heat source when efficiency decreases.

Peak avoidance mode: Reduces consumption during the hours of the highest tariffs.

Monitoring and control

Weather-sensitive controller with color screen:

• Displays current operating parameters
• Programming schedules and modes
• Monitoring of energy consumption
• Control via mobile application

Real savings according to European standards

Energy efficiency indicators

SCOP of up to 4.98 means that the heat pump produces almost 5 kW of heat for 1 kW of electricity consumption. This is 5-6 times more efficient than electric heating and 4-5 times more efficient than gas boilers.

Standby consumption: only 0.010-0.045 kW - the lowest among all heating systems.

Comparison with traditional systems

Implementation of European standards in your home

Professional installation

Factory strapping ensures:

• Minimum installation time
• Guaranteed quality of connections
• Filling with R32 refrigerant for routes up to 5 m
• Ready-made communication cable

Adaptation to different objects

BeeSmart is suitable for:

• Private houses and cottages
• Apartments with appropriate technical conditions
• New construction and reconstruction projects
• Heating systems with radiators, fan coils or underfloor heating

Take advantage of European experience today

Exclusive offer for progressive homeowners:

Free consultation with the calculation of savings according to European methods
20% discount on professional installation according to European standards
Certified 5-yearwarranty on all components
Free setting of optimal saving modes

Join the European energy revolution:

1. Call now for a consultation with an expert
2. Get a personalized calculation of savings for your facility
3. Choose the date of professional installation according to European standards
4. Enjoy the comfort and savings of the European level

European quality guarantee: If within a year your savings are less than the calculated ones, we will optimize the system or compensate the difference for free!

Don't be left behind in the European energy revolution. Learn more about the Mycond BeeSmart All-in-One heat pump and implement European energy efficiency standards in your home.

Remember: Europeans have chosen heat pumps as the basis of modern HVAC systems for a reason. It's time for you to take advantage of this savings secret!